Satisfyer Pro2 Replacement Heads (5 Pack)

Perfect

I’m a Satisfyer addict! I love mine and use it most days. Mostly in the shower, which had lead to me not realising it wasn’t drying properly and had developed a scummy bit in the head around the back that I only spotted when I turned the head completely inside out and peeled it all apart. Gross. Lesson learnt! Less rushing with the cleaning! Love knowing I’ve got spares and backups for the future and for if we have any playmates over.

Essential extra for those who own a Satisfyer

As much as I love my Satisyfer, it was disappointing that it only came with one head. Luckily, I received this pack of replacement heads along with my Satisfyer to review, so thank you Leanne! The replacement heads come in a nicely presented box, complete with a picture of the Satisfyer. Inside, I found five replacement heads sealed within a little plastic bag. The side of the box says that there are two desire enhancing tips and 3 standard climax tips inside. I honestly cannot tell the difference between them as they look very similar and I couldn’t tell you that they feel different either. The heads are made from high-quality silicone, which is very silky and smooth to the touch. I would advise only using water-based lubricant with the Satisfyer to protect the lovely silicone elements. The heads are easy to clean as they can be removed from the Satisfyer easily and are waterproof, they just twist off and can be rinsed under water. I like to use a toothbrush with toy cleaner around the head to remove any traces of lubricant, as it does seem to attract it. The heads are also easy to put back on, when fully dry, just twist the head back onto the nozzle of the Satisfier, making sure it’s not loose and you’re all ready for next time. I’ve only had my Satisfyer for a couple of weeks at the time of writing this review, so I haven’t felt the need to change the head yet, but as I’ve been using the toy regularly, I’ll probably be changing the heads once a month or so for hygiene purposes. This box will last me for a few months, but I’ll make sure to always some on hand, just in case I need them. Overall, this packet of replacement heads is an essential purchase if you own or are considering owning the Satisfyer. I’m not sure how much they’re going to cost at this time, but for what the Satisfier can do, it’s be worth paying for the extras.

Basic but essential!

I was sent these extra silicone heads to test out in conjunction with the Satisfyer Pro 2 in exchange for an honest review and in all honestly, there’s not a huge amount I can say about them. They get the job done, they’re useful to have if you own a Satisfyer Pro 2 in case it loses the head or the silicone becomes worn. That’s about it. Okay, with this set you get five silicone heads; three standards and two ‘desire enhancers.’ In all honesty, they felt the exact same for me and I found it all but impossible to distinguish them visually or when they were in use, but despite being incredibly similar they all worked beautifully with the Satisfyer Pro 2 to give wonderful sensations, so I can’t really complain. The packaging is very similar to the box the main toy comes in: simple, pretty and very clear. I love the style because it looks effortlessly good and doesn’t waste excess material. All the silicone was perfectly moulded without a nick or scratch in sight, and other than there being no real change in sensation between the heads it was a brilliant support product. I had no issue with replacing the head- they just slip on and off, held in place with a small indent in the plastic and ridge in the silicone. It’s delicate but surprisingly strong; once you’ve got it on properly it won’t slip off easily. This is a basic product that doesn’t require a tome to review, so I’ll keep it short and cut off here. If you’re going to go for the Satisfyer Pro 2 (and I wholeheartedly recommend that you do!) it’s always a good idea to have some spare heads available, and these do the job perfectly.

Extend the life of your Satisfyer

I'm in love with my Satisfyer Pro2 - so when these replacement heads came out I was eager to get my hands on some. It is great that replacement heads are now available so I can turn my Satisfyer love affair into a long-term romance. As the most 'delicate' part of the device, I could imagine them becoming loose or splitting after long-term use (however, the heads I got with my original Satisfyer haven't shown much sign of aging after a few months). What I found strange is that all the heads are the same. Like other reviewers, I cannot tell the difference between the two 'types' of head to save myself! They are essentially all the same as the ones that came with the Satisfyer. So if you are looking or a 'different experience' with the another head shape you will probably be disappointed. However, if you just want more heads to keep your Satisfyer going long into the future, these will do the job.

Loving the larger attachment! Its

Loving the larger attachment! Its also great to have spares handy so I don't have to wash the one every time I use it (which is every day at the moment! hehehe)

Perfect

I’m a satisfyer addict! I love mine and use it most days. Mostly in the shower, which had lead to me not realised it wasn’t drying properly and had developed a scummy bit in the head around the back that I only spotted when I turned the head completely inside out and peeled it all apart. Gross. Lesson learnt! Less rushing with the cleaning! Love knowing I’ve got spares and back ups for the future and for if we have any playmates over

Extend the life of your Satisfyer

I'm in love with my Satisfyer Pro2 - so when these replacement heads came out I was eager to get my hands on some. It is great that replacement heads are now available so I can turn my Satisfyer love affair into a long term romance. As the most 'delicate' part of the device I could imagine them becoming loose or splitting after long term use (however the heads I got with my original Satisfyer haven't shown much sign of aging after a few months). What I found strange is that all the heads are the same. Like other reviewers I cannot tell the difference between the two 'types' of head to save myself! They are essentially all the same as the ones that came with the Satisfyer. So if you are looking or a 'different experience' with the another head shape you will probably be disappointed. However if you just want more heads to keep your Satisfyer going long into the future these will do the job.

Essential extra for those who own a Satisfyer

As much as I love my Satisyfer, it was disappointing that it only came with one head. Luckily, I received this pack of replacement heads along with my Satisfyer to review, so thank you Leanne! The replacement heads come in a nicely presented box, complete with a picture of the Satisfyer. Inside, I found five replacement heads sealed within a little plastic bag. The side of the box says that there are two desire enhancing tips and 3 standard climax tips inside. I honestly cannot tell the difference between them as they look very similar and I couldn’t tell you that they feel different either. The heads are made from high-quality silicone, which is very silky and smooth to the touch. I would advise only using water-based lubricant with the Satisfyer to protect the lovely silicone elements. The heads are easy to clean as they can be removed from the Satisfyer easily and are waterproof, they just twist off and can be rinsed under water. I like to use a toothbrush with toy cleaner around the head to remove any traces of lubricant, as it does seem to attract it. The heads are also easy to put back on, when fully dry, just twist the head back onto the nozzle of the Satisfier, making sure it’s not loose and you’re all ready for next time. I’ve only had my Satisfyer for a couple of weeks at the time of writing this review, so I haven’t felt the need to change the head yet, but as I’ve been using the toy regularly, I’ll probably be changing the heads once a month or so for hygiene purposes. This box will last me for a few months, but I’ll make sure to always some on hand, just in case I need them. Overall, this packet of replacement heads is an essential purchase if you own or are considering owning the Satisfyer. I’m not sure how much they’re going to cost at this time, but for what the Satisfier can do, it’s be worth paying for the extras.

Basic but essential!

I was sent these extra silicone heads to test out in conjunction with the Satisfyer Pro 2 in exchange for an honest review and in all honestly, there’s not a huge amount I can say about them. They get the job done, they’re useful to have if you own a Satisfyer Pro 2 in case it loses the head or the silicone becomes worn. That’s about it. Okay, with this set you get five silicone heads; three standards and two ‘desire enhancers.’ In all honesty, they felt the exact same for me and I found it all but impossible to distinguish them visually or when they were in use, but despite being incredibly similar they all worked beautifully with the Satisfyer Pro 2 to give wonderful sensations, so I can’t really complain. The packaging is very similar to the box the main toy comes in: simple, pretty and very clear. I love the style because it looks effortlessly good and doesn’t waste excess material. All the silicone was perfectly moulded without a nick or scratch in sight, and other than there being no real change in sensation between the heads it was a brilliant support product. I had no issue with replacing the head- they just slip on and off, held in place with a small indent in the plastic and ridge in the silicone. It’s delicate but surprisingly strong; once you’ve got it on properly it won’t slip off easily. This is a basic product that doesn’t require a tome to review, so I’ll keep it short and cut off here. If you’re going to go for the Satisfyer Pro 2 (and I wholeheartedly recommend that you do!) it’s always a good idea to have some spare heads available, and these do the job perfectly.

Loving the larger attachment! Its

Loving the larger attachment! Its also great to have spares handy so I don't have to wash the one every time I use it (which is every day at the moment! hehehe)

Perfect

I’m a satisfyer addict! I love mine and use it most days. Mostly in the shower, which had lead to me not realised it wasn’t drying properly and had developed a scummy bit in the head around the back that I only spotted when I turned the head completely inside out and peeled it all apart. Gross. Lesson learnt! Less rushing with the cleaning! Love knowing I’ve got spares and back ups for the future and for if we have any playmates over

Extend the life of your Satisfyer

I'm in love with my Satisfyer Pro2 - so when these replacement heads came out I was eager to get my hands on some. It is great that replacement heads are now available so I can turn my Satisfyer love affair into a long term romance. As the most 'delicate' part of the device I could imagine them becoming loose or splitting after long term use (however the heads I got with my original Satisfyer haven't shown much sign of aging after a few months). What I found strange is that all the heads are the same. Like other reviewers I cannot tell the difference between the two 'types' of head to save myself! They are essentially all the same as the ones that came with the Satisfyer. So if you are looking or a 'different experience' with the another head shape you will probably be disappointed. However if you just want more heads to keep your Satisfyer going long into the future these will do the job.

Essential extra for those who own a Satisfyer

As much as I love my Satisyfer, it was disappointing that it only came with one head. Luckily, I received this pack of replacement heads along with my Satisfyer to review, so thank you Leanne! The replacement heads come in a nicely presented box, complete with a picture of the Satisfyer. Inside, I found five replacement heads sealed within a little plastic bag. The side of the box says that there are two desire enhancing tips and 3 standard climax tips inside. I honestly cannot tell the difference between them as they look very similar and I couldn’t tell you that they feel different either. The heads are made from high-quality silicone, which is very silky and smooth to the touch. I would advise only using water-based lubricant with the Satisfyer to protect the lovely silicone elements. The heads are easy to clean as they can be removed from the Satisfyer easily and are waterproof, they just twist off and can be rinsed under water. I like to use a toothbrush with toy cleaner around the head to remove any traces of lubricant, as it does seem to attract it. The heads are also easy to put back on, when fully dry, just twist the head back onto the nozzle of the Satisfier, making sure it’s not loose and you’re all ready for next time. I’ve only had my Satisfyer for a couple of weeks at the time of writing this review, so I haven’t felt the need to change the head yet, but as I’ve been using the toy regularly, I’ll probably be changing the heads once a month or so for hygiene purposes. This box will last me for a few months, but I’ll make sure to always some on hand, just in case I need them. Overall, this packet of replacement heads is an essential purchase if you own or are considering owning the Satisfyer. I’m not sure how much they’re going to cost at this time, but for what the Satisfier can do, it’s be worth paying for the extras.

Basic but essential!

I was sent these extra silicone heads to test out in conjunction with the Satisfyer Pro 2 in exchange for an honest review and in all honestly, there’s not a huge amount I can say about them. They get the job done, they’re useful to have if you own a Satisfyer Pro 2 in case it loses the head or the silicone becomes worn. That’s about it. Okay, with this set you get five silicone heads; three standards and two ‘desire enhancers.’ In all honesty, they felt the exact same for me and I found it all but impossible to distinguish them visually or when they were in use, but despite being incredibly similar they all worked beautifully with the Satisfyer Pro 2 to give wonderful sensations, so I can’t really complain. The packaging is very similar to the box the main toy comes in: simple, pretty and very clear. I love the style because it looks effortlessly good and doesn’t waste excess material. All the silicone was perfectly moulded without a nick or scratch in sight, and other than there being no real change in sensation between the heads it was a brilliant support product. I had no issue with replacing the head- they just slip on and off, held in place with a small indent in the plastic and ridge in the silicone. It’s delicate but surprisingly strong; once you’ve got it on properly it won’t slip off easily. This is a basic product that doesn’t require a tome to review, so I’ll keep it short and cut off here. If you’re going to go for the Satisfyer Pro 2 (and I wholeheartedly recommend that you do!) it’s always a good idea to have some spare heads available, and these do the job perfectly.

Replacement

Really these are only good if you need new heads for your satisfyer. They don't make a better sensation. I ordered them due to my head being broken.